Modulation in serum and hematological parameters as a prognostic indicator of COVID-19 infection in hypertension, diabetes mellitus, and different cardiovascular diseases.

SARS-CoV-2 infection affects and modulates serum as well as hematological parameters. However, whether it modifies these parameters in the existing disease conditions, which help in the erection of specific treatments for the disease, is under investigation. Here, we aimed to determine whether serum and hematological parameters alteration in various diseases, diabetes mellitus (DM), hypertension (HTN), ischemic heart disease (IHD) and myocardial infarction (MI) conditions correlate and signal SARS-CoV-2 infection, which could be used as a rapid diagnosis tool for SARS-CoV-2 infection in disease conditions. To assess the projected goals, we collected blood samples of 1,113 male and female patients with solo and multiple disease conditions of DM/HTN/IHD/MI with severe COVID-19, followed by biochemical analysis, including COVID-19 virus detection by RT-qPCR. Furthermore, blood was collected from age-matched disease and healthy individuals 502 and 660 and considered as negative control. In our results, we examined higher levels of serum parameters, including D-dimer, ferritin, hs-CRP, and LDH, as well as hematological parameters, including TLC in sole and multiple diseases (DM/HTN/IHD/MI) conditions compared to the control subjects. Besides, the hematological parameters, including Hb, RBC, and platelet levels, decreased in the patients. In addition, we found declined levels of leukocyte count (%), lymphocyte (%), monocyte (%), and eosinophil (%), and elevated level of neutrophil levels (%) in all the disease patients infected with SARS-CoV-2. Besides, NLR and NMR ratios were also statistically significantly (p < 0.05) high in the patients with solo and multiple disease conditions of DM/HTN/IHD/MI infected with the SARS-CoV-2 virus. In conclusion, rapid alteration of sera and hematological parameters are associated with SARS-CoV-2 infections, which could help signal COVID-19 in respective disease patients. Moreover, our results may help to improve the clinical management for the rapid diagnosis of COVID-19 concurrent with respective diseases.

Analysis of wind characteristics and wind energy resource assessment for Tonga using eleven methods of estimating Weibull parameters.

of wind characteristics and assessment of wind energy resource is carried out at a location in Tonga with the help of twelve months of measurements carried out at 34 m and 20 m heights above ground level. The daily, monthly and annual averages are computed. The wind shear analysis and its diurnal variation were studied and compared with the temperature variation. The turbulence levels at the two heights were estimated for the entire measurement period as well as for some typical days. For estimating the Weibull parameters, eleven methods were employed along with goodness of fit and error estimates to find the best method. The overall averaged wind speed for the entire period of study is estimated to be 4.41 m/s at 34 m above ground level. The predominant wind direction was south-east for Tonga. 'Moments' is seen to be the best method to determine accurate Weibull parameters. The average net annual energy production from one Vergnet 275 kW wind turbine is 198.57 MWh. A payback period of 8.95 years by installing five turbines near the measurement location was estimated, which is very encouraging in terms of investment. Installing wind turbines will lower the heavy reliance on the imported fossil fuels in the country and also help in achieving Sustainable Development Goal 7.

A new anti-inflammatory lupane in Ziziphus jujuba (L.) Gaertn. var. hysudrica Edgew.

Objectives: To investigate extracts of the stem bark of Ziziphus jujuba (L.) Gaertn. var. hysudrica Edgew. (Rhamnaceae) for anti-inflammatory activity and isolate the active principle(s). Methods: The dry powder was macerated separately in three types of solvents to prepare methanol extract (ME), ethyl acetate extract (EE), and chloroform extract (CE). Following in vitro anti-inflammatory screening, the most active extract was selected to isolate the active compound. Both, the active extract and isolated compound were further tested on rats using the carrageenan-induced inflammation model. The blood and paw tissue were subjected to qPCR, and histopathology, respectively. Key findings: CE showed comparatively higher anti-inflammatory activity (85.0-95.0 %) in all in vitro assays, except the heat-induced membrane stabilization model (p < 0.05), and upon column chromatography, it yielded a pure crystalline compound. The compound was a pentacyclic triterpenoid (Lupane), named as hydroxymethyl (3ß)-3-methyl-lup-20(29)-en-28-oate (Hussainate). CE (500 mg/kg) and Hussainate (1.0 mg/kg) reduced edema in 5 h after carrageenan administration. The activity of Hussainate was found to be comparable to that of dexamethasone (standard). The possible activity mechanism was the downregulation of tumor necrosis factor-alpha (TNF-α), cyclooxygenase-2 (COX-II), NF-κB, and IL-1ß. Conclusions: This study reveals that chloroform extract of the stem's bark of Z. jujuba may be used to prepare standardized anti-inflammatory herbal products using Hussainate as an active analytical marker. Hussainate may be used as a lead to develop anti-inflammatory drugs.

Physicomechanical, Wettability, Corrosion, Thermal, and Microstructural Morphology Characteristics of Carbonized and Uncarbonized Bagasse Ash Waste-Reinforced Al-0.45Mg-0.35Fe-0.25Si-Based Composites: Fabrications and Characterizations.

An effort was being made to incorporate waste bagasse ash (WBA) both in carbonized and uncarbonized form into the formulation of Al6063 matrix-based metal matrix composites (MMC's) by partially substituting ceramic particles for them. In the process of developing composites, comparative research on carbonized WBA and uncarbonized bagasse powder was carried out in the role of reinforcement. Microstructure investigations revealed that carbonized WBA particles were properly distributed throughout the aluminum-base metal matrix alloy. They also had the appropriate level of wettability. The reinforcement of carbonized WBA particles in AA6063-based matrix material had a maximum tensile strength of 110 MPa and a maximal hardness of 39 BHN when 3.75 wt % of the particles were used. The deterioration in tensile strength (6.25 wt % of WBA) and the appearance of porosity and blowholes can be enumerated by tensile fractography-based scanning electron microscopy (SEM) analysis. The reinforcement of carbonized WBA particles in AA6063-based matrix material was found to have a maximal percent elongation of 14.42% and the highest fracture toughness of 15 Joules when 1.25 wt % of the particles were employed. For AA6063/3.75 wt % carbonized WBA-based MMC's, the minimum percent porosity was determined to be 5.83, and the minimum thermal expansion was found to be 45 mm3. As the percentage of reinforcement in bagasse-reinforced composites increases, the density of the material, the amount of corrosion loss, and the cost all decrease gradually. The AA6063 matrix, with a composition of 3.75 wt % carbonized WBA-based MMC's, had satisfactory specific strength and corrosion loss. The AA6063 alloy composite's microstructure analysis revealed that carbonized WBA enhanced the material's mechanical characteristics, contributing to its excellent mechanical capabilities. The results of the corrosion test showed that carbonized WBA-reinforced composites exhibited reduced weight loss due to corrosion, whereas uncarbonized bagasse powder was an inappropriate reinforcement. The SEM analysis of AA6063 alloy/3.75 wt % carbonized WBA ash reinforcement-based MMC's exposed to a 3.5 wt % NaCl solution has exhibited the development of corrosion pits as a result of localized attack by the corrosive environment. The thermal expansion test showed that the composite with uncarbonized bagasse powder as reinforcement have a high shrinkage rate in comparison with the composite with 3.75 wt %. The composite's mechanical characteristics and thermal stability were enhanced by the presence of hard phases like SiO2, Al2O3, Fe2O3, CaO, and MgO, as revealed by X-ray diffraction analysis. This made it suitable for use in a variety of applications.

Exploring Microstructural, Interfacial, Mechanical, and Wear Properties of AlSi7Mg0.3 Composites with TiMOVWCr High-Entropy Alloy Powder.

This study explored the impact of varying weight percentages of TiMoVWCr high-entropy alloy (HEA) powder addition on A356 composites produced using friction stir processing (FSP). Unlike previous research that often focused on singular aspects, such as mechanical properties, or microstructural analysis, this investigation systematically examined the multifaceted performance of A356 composites by comprehensively assessing the microstructure, interfacial bonding strength, mechanical properties, and wear behavior. The study identified a uniform distribution of TiMoVWCr HEA powder in the composition A356/2%Ti2%Mo2%V2%W2%Cr, highlighting the effectiveness of the FSP technique in achieving homogeneous dispersion. Strong bonding between the reinforcement and matrix material was observed in the same composition, indicating favorable interfacial characteristics. Mechanical properties, including tensile strength and hardness, were evaluated for various compositions, demonstrating significant improvements across the board. The addition of 2%Ti2%Mo2%V2%W2%Cr powder enhanced the tensile strength by 36.39%, while hardness improved by 62.71%. Similarly, wear resistance showed notable enhancements ranging from 35.56 to 48.89% for different compositions. Microstructural analysis revealed approximately 1640.59 grains per square inch for the A356/2%Ti2%Mo2%V2%W2%Cr processed composite at 500 magnifications. In reinforcing Al composites with Ti, Mo, V, W, and Cr high-entropy alloy (HEA) particles, each element imparted distinct benefits. Titanium (Ti) enhanced strength and wear resistance, molybdenum (Mo) contributed to improved hardness, vanadium (V) promoted hardenability, tungsten (W) enhanced wear resistance, and chromium (Cr) provided wear resistance and hardness. Anticipating the potential applications of the developed composite, the study suggests its suitability for the aerospace sector, particularly in casting lightweight yet high-strength parts such as aircraft components, engine components, and structural components, underlining the significance of the investigated TiMoVWCr HEA powder-modified A356 composites.

Laser-induced breakdown spectroscopy (LIBS) of animal fat (lard): Efficient sample preparation for onsite analysis and influence of sample temperature on the signal intensity and plasma parameters.

We report an efficient sample preparation method (freezing) for onsite fat and meat analysis via a specially designed thermoelectric cooling and temperature-controlling system. This investigation also focused on the effect of phase change on the sensitivity and reproducibility of LIBS emission signals and plasma parameters. The plasma emissions of animal fats (lard) were recorded when the sample was frozen (-2 °C), fluid (15 °C), and in a liquid state (37 °C) with a thermoelectric cooling system. At each temperature, the plasma emissions were acquired at laser pulse energy from 50 to 300 mJ and detector gate delay (DGD) from 0.5 to 5 µs. With increasing sample temperature, the DGD, where the optical emission intensity reached a maximum, decreased. At a laser pulse energy of 200 mJ and a sample temperature of -2 °C, the emission signals increased fourfold, the signal-to-noise ratio (SNR) improved tenfold, and the self-absorption in the emission lines decreased significantly. The repeatability of the emission signals and plasma parameters of frozen and liquid fat samples was determined using the relative standard deviation (RSD) of Se I (473.08 nm) and K I (766.48 nm) emission lines. The RSDs of the emission signals improved from 40 to 18 % and 37 to 16 %, whereas the shot-to-shot RSDs of the electron temperature and electron number density get improved from 11 to 6 % and 12 to 6.8 %, respectively.

Theoretical investigations of structural, electronic, magnetic, and optical properties of group V (X = V, Nb, Ta) added CeO2-X materials for optoelectronic applications.

CONTEXT: Depletion of natural resources, responsible for energy production, is a serious concern for researchers to develop alternate energy resources or materials. Scientists have proposed various energy materials which are based on semiconductors and their underlying physics. Cerium oxide (CeO2) is a versatile energy material which receives much attention owing to excellent photocatalytic, photonic, thermal stability, and optoelectronic applications. Even though CeO2 exhibited remarkable physical properties, but yet, they can be enhanced upon suitable doping. Focus on current research is to dope group V elements into CeO2 in order to enhance its electronic and optical response. The density of states (DOS) and band gaps of proposed materials are calculated, and significant improvement is noted after applying TB-mbj method. Optical absorption spectra of V/Nb/Ta-doped CeO2 show blueshift and decrease in reflectivity along with the presence of magnetism illustrate potential uses of these materials in future UV optoelectronics, spintronics, sensing, and energy harvesting devices. METHODS: This research is based on computational work carried using Wien2k code where PBE-GGA approximation is used to approximate exchange and correlation potentials. Supercells of vanadium/niobium/tantalum-doped CeO2 are constructed, and spin-polarized density of states (DOS) along with optical constant are calculated. TB-mbj method is used to bring improvements in DOS and band gaps of proposed materials. Iterations are conducted using convergence criterion, and non-relativistic calculations are performed.

Insight into hematological parameters of petrol station workers.

OBJECTIVE: Benzene is one of the major carcinogenic factors that can affect liver, kidneys, and lungs. Chronic inhalation of benzene vapor by petrol stations workers has been shown to have an impact on hematological parameters; thus, the present study aimed to investigate the effect of benzene exposure on petrol station workers. SUBJECTS AND METHODS: The study involved 99 participants, 50 of whom have been exposed to benzene and 49 of whom have not (control). A 5 ml blood sample in an ethylenediaminetetraacetic acid (EDTA) anticoagulant tube was collected from each subject, and a complete blood count test was used to test hematological parameters. RESULTS: The current study showed a significant decrease in red blood cells, packed cell volume, and hemoglobin in the exposed group compared to the control group. However, the amount of white blood cells was significantly increased (p < 0.0001) in the exposed group compared to the control group. Notably, there was no significant difference in platelet counts between the two groups. In terms of exposure time, subjects who have been exposed to benzene for more than a year and fewer than 10 years showed a significant decrease (p < 0.05) in RBCs indices and a significant increase (p < 0.0001) in WBCs compared to those in the control group CONCLUSIONS: Thus, the findings indicated that significant differences in hematological parameters were found in workers who were exposed to benzene compared to those who had not been exposed.

Physicomechanical, morphological and tribo-deformation characteristics of lightweight WC/AZ31B Mg-matrix biocomposites for hip joint applications.

Exploring high strength materials with a higher concentration of reinforcements in the alloy proves to be a challenging task. This research has explored magnesium-based composites (AZ31B alloy) with tungsten carbide reinforcements, enhancing strength for medical joint replacements via league championship optimisation. The primary objective is to enhance medical joint replacement biomaterials employing magnesium-based composites, emphasising the AZ31B alloy with tungsten carbide reinforcements. The stir casting method is utilised in the manufacture of magnesium matrix composites (MMCs), including varied percentages of tungsten carbide (WC). The mechanical characteristics, such as micro-hardness, tensile strength, and yield strength, have been assessed and compared with computational simulations. The wear studies have been carried out to analyse the tribological behaviour of the composites. Additionally, this study investigates the prediction of stress and the distribution of forces inside bone and joint structures, therefore offering significant contributions to the field of biomedical research. This research contemplates the use of magnesium-based MMCs for the discovery of biomaterials suitable for medical joint replacement. The study focuses on the magnesium alloy AZ31B, with particles ranging in size from 40 to 60 microns used as the matrix material. Moreover, the outcomes have revealed that when combined with MMCs based on AZ31B-magnesium matrix, the WC particle emerges as highly effective reinforcements for the fabrication of lightweight, high-strength biomedical composites. This study uses the league championship optimisation (LCO) approach to identify critical variables impacting the synthesis of Mg MMCs from an AZ31B-based magnesium alloy. The scanning electron microscopy (SEM) images are meticulously analysed to depict the dispersion of WC particulates and the interface among the magnesium (Mg) matrix and WC reinforcement. The SEM analysis has explored the mechanisms underlying particle pull-out, the characteristics of inter-particle zones, and the influence of the AZ31B matrix on the enhancement of the mechanical characteristics of the composites. The application of finite element analysis (FEA) is being used in order to make predictions regarding the distribution of stress and the interactions of forces within the model of the hip joint. This study has compared the physico-mechanical and tribological characteristics of WC to distinct combinations of 0%, 5%, 10% and 15%, and its impact on the performance improvements. SEM analysis has confirmed the findings' improved strength and hardness, particularly when 10%-15% of WC was incorporated. Following the incorporation of 10% of WC particles within Mg-alloy matrix, the outcomes of the study has exhibited enhanced strength and hardness, which furthermore has been evident by utilising SEM analysis. Using ANSYS, structural deformation and stress levels are predicted, along with strength characteristics such as additional hardness of 71 HRC, tensile strength of 140-150 MPa, and yield strength closer to 100-110 MPa. The simulations yield significant insights into the behaviour of the joint under various loading conditions, thus enhancing the study's significance in biomedical environments.

Systematic challenges and opportunities in insect monitoring: a Global South perspective.

Insect monitoring is pivotal for assessing biodiversity and informing conservation strategies. This study delves into the complex realm of insect monitoring in the Global South-world developing and least-developed countries as identified by the United Nations Conference on Trade and Development-highlighting challenges and proposing strategic solutions. An analysis of publications from 1990 to 2024 reveals an imbalance in research contributions between the Global North and South, highlighting disparities in entomological research and the scarcity of taxonomic expertise in the Global South. We discuss the socio-economic factors that exacerbate the issues, including funding disparities, challenges in collaboration, infrastructure deficits, information technology obstacles and the impact of local currency devaluation. In addition, we emphasize the crucial role of environmental factors in shaping insect diversity, particularly in tropical regions facing multiple challenges including climate change, urbanization, pollution and various anthropogenic activities. We also stress the need for entomologists to advocate for ecosystem services provided by insects in addressing environmental issues. To enhance monitoring capacity, we propose strategies such as community engagement, outreach programmes and cultural activities to instill biodiversity appreciation. Further, language inclusivity and social media use are emphasized for effective communication. More collaborations with Global North counterparts, particularly in areas of molecular biology and remote sensing, are suggested for technological advancements. In conclusion, advocating for these strategies-global collaborations, a diverse entomological community and the integration of transverse disciplines-aims to address challenges and foster inclusive, sustainable insect monitoring in the Global South, contributing significantly to biodiversity conservation and overall ecosystem health. This article is part of the theme issue 'Towards a toolkit for global insect biodiversity monitoring'.

Elevated sympathetic-mediated vasoconstriction at rest but intact functional sympatholysis during exercise in heart failure with reduced ejection fraction.

BACKGROUND: Patients with heart failure with reduced ejection fraction (HFrEF) have exaggerated sympathoexcitation and impaired peripheral vascular conductance. Evidence demonstrating consequent impaired functional sympatholysis is limited in HFrEF. This study aimed to determine the magnitude of reduced limb vascular conductance during sympathoexcitation and whether functional sympatholysis would abolish such reductions in HFrEF. METHODS: Twenty patients with HFrEF and 22 age-matched controls performed the cold pressor test (left foot 2-min in -0.5[1] °C water) alone (CPT) and with right handgrip exercise (EX+CPT). Right forearm vascular conductance (FVC), forearm blood flow (FBF), and mean arterial pressure (MAP) were measured. RESULTS: Patients with HFrEF had greater decreases in %ΔFVC and %ΔFBF during CPT (both P<0.0001) but not EX+CPT (P=0.449, P=0.199) compared to controls, respectively. %ΔFVC and %ΔFBF decreased from CPT to EX+CPT in patients with HFrEF (both P<0.0001) and controls (P=0.018, P=0.015), respectively. MAP increased during CPT and EX+CPT in both groups (all P<0.0001). MAP was greater in controls compared to patients with HFrEF during EX+CPT (P=0.025) but not CPT (P=0.209). CONCLUSIONS: Acute sympathoexcitation caused exaggerated peripheral vasoconstriction and reduced peripheral blood flow in patients with HFrEF. Handgrip exercise abolished sympathoexcitatory-mediated peripheral vasoconstriction and normalized peripheral blood flow in patients with HFrEF. These novel data reveal intact functional sympatholysis in the upper limb and suggest exercise-mediated, local control of blood flow is preserved when cardiac limitations that are cardinal to HFrEF are evaded with dynamic handgrip exercise.

A hospital-based study of prostate biopsy results in Indian males.

Introduction: The prostate is a gland belonging to the male reproductive system. Aging results in the dysfunction of the prostate that may present as inflammation, enlargement, and cancer. Additionally, the diseases of the prostate including cancers are slow in progression, and therefore, it is difficult to diagnose them early. Hence, it is increasingly important for physicians to recommend histopathological examination of the prostate gland to identify, manage, and treat prostate cancers. This study was conducted to assess prostate diseases among biopsy specimen collected from patients with signs of prostate diseases. Materials and Methods: This prospective study was conducted in the Department of Pathology, Deccan College of Medical Sciences, Owaisi Hospital, Hyderabad, between June 2012 and September 2014. All gross specimens (n = 300) of the prostate such as the needle biopsies of the prostate, transurethral resection of the prostate (TURP) chips, and excised specimens of the prostate were included in the study. Histopathological examinations of the biopsies were performed for nuclear size, chromatin material, nucleoli, membrane thickness, irregularity, cytoplasmic granularity, staining, and cell border conspicuity. The biopsies were also assessed for lobule formation, secretions, polymorphonuclear leukocytes, lymphocytes, macrophages, connective tissue stromal cells, their arrangements, and acellular connective tissue material. Results: Of 300 total prostatic biopsies performed, 56 (18.66%) were identified as inflammatory lesions of the prostate (prostatitis), 98 (32.66%) revealed benign prostatic lesions (benign prostatic hyperplasia (BPH)), 112 (37.33%) were identified as BPH with premalignant lesions, and 34 (11.33%) were revealed as malignant tumors of the prostate. Chronic prostatitis (67.85%) was the common inflammatory lesion. The majority (91.42%) revealed epithelial lesions compared to stromal lesions (08.58%). BPH was predominantly (28.00%) noticed among patients in the age group of 61-70 years. Prostatic intraepithelial neoplasia (PIN) was observed majorly (53.35%) in the age group of 61-70 years. Most of the prostatic cancers were identified as adenocarcinomas. However, three variants were also categorized as small cell carcinoma, signet ring cell carcinoma, and transitional cell carcinomas. Conclusions: The results reveal that prostatic adenocarcinomas are predominant among the study population. Additionally, prostatic diseases including cancer are commonly noticed among people belonging to the age group of 61-70 years. More than one-third of patients showed BPH with premalignant lesions, and a majority of the study population showed evidence of chronic prostatitis.

Burns During Covid-19 Pandemic: Demographics, Etiological and Clinical Trends in 2021 at the National Burn Care Centre in Islamabad, Pakistan.

The scarcity of data on burn-related injuries in Pakistan prompted this study. The study is specifically aimed at assessing the burn patients who were admitted to a national burn care center (BCC) in Pakistan. This single-center retrospective analysis was conducted for 12 months from January to December 2021. During this time period, 14,069 patients visited BCC with burn injuries of diverse natures while 613 of them were admitted. The patients' information was abstracted from the hospital database. This information included age, sex, diagnosis, burn depth/degree, time of arrival, circumstances of burn injury, TBSA (total burn surface area), complications, outcome, and management plan. This information was shifted to Microsoft Office Excel Worksheet 2015 and then coded into the IBM Statistical Package for the Social Sciences (SPSS) version 24.0. Armonk, NY: IBM Corp. Of 14,069 patients, 613 were admitted to the burn care center, indicating an admission rate of 4.35%. Among these 613 patients, there was a high proportion of males (58.89%) and a mean age of 20.2±12.5 years. Most patients (40.4%) visited within the first hour after being burnt and flame burns were the most common (41.10%). Most patients were burnt due to accidents (97.7%). The mean length of hospital stay was 15.5 days. Flames were the main cause of burns among our cohort of patients. Most patients had a TBSA of >10% and generally had a second-degree burn, mostly in the pediatric population. An urgent appraisal of burn policies and related legislation is needed to halt the burn burden in the country.

Cette étude a été décidée en raison de la pauvreté des données épidémiologiques concernant les brûlures au Pakistan. Il s'agit d'une étude monocentrique rétrospective sur dossier conduite dans le CTB national d'Islamabad sur l'année 2021. Sur les 14 069 patients brûlés qui s'y sont présentés, 613 (4,35%) ont été hospitalisés. Nous avons recueilli l'âge, le sexe, la SCB, la profondeur, la cause, le délai de présentation, la stratégie thérapeutique, les complications et le devenir des patients. Les données ont été implantée dans Excel et analysées avec SSPS 24.0. Parmi les patients hospitalisés, 58,89% étaient des hommes âgés de 20,2±12,5 ans. Le délai de présentation était de moins de 1h dans 40,4% des cas et l'atteinte était quasiment toujours accidentelle (97,7%), majoritairement par flamme (41%). La DMS était de 15,5 j. L'atteinte était le plus souvent > 10% SCT, habituellement au 2ème degré en particulier en population pédiatrique. Une évaluation de la législation préventive est urgente, afin de mettre fin au fardeau que représentent les brûlures dans notre pays.

Comparative Analysis of Stereotactic Radiation Therapy and Conventional Radiation Therapy in Cancer Pain Control: A Systematic Review and Meta-Analysis.

AIMS: Approximately 55% of patients diagnosed with primary or metastatic cancer endure pain directly attributable to the disease. Consequently, it becomes imperative to address pain management through a comparative analysis of stereotactic radiotherapy (SRT) and conventional radiation therapy (CRT), especially in light of the less efficacious improvement achieved solely through pharmacological interventions. MATERIALS AND METHODS: A systematic exploration was undertaken on PubMed, the Cochrane Library, and Elsevier's ScienceDirect databases to identify studies that compare Stereotactic Radiotherapy to Conventional radiation therapy for pain management in individuals with metastatic bone cancer. The analyses were executed utilizing the random-effects model. RESULTS: A cohort of 1152 participants with metastatic bone cancer was analyzed, demonstrating significantly higher complete pain relief in the Stereotactic Radiotherapy group during both early and late follow-up (RR: 1.61; 95% CI: 1.17, 2.23, p-value: 0.004; I2: 0%). Stereotactic Radiotherapy also showed a non-significant increase in the incidence of partial pain relief (RR: 1.07; 95% CI: 0.85, 1.34, p-value: 0.56; I2: 18%). Furthermore, Stereotactic Radiotherapy was associated with a significantly reduced risk of stationary pain throughout follow-up (RR: 0.61; 95%CI: 0.48, 0.76, p-value: <0.0001; I2: 0. The incidence of progressive pain was non-significantly reduced with Stereotactic Radiotherapy during both early and late follow-up (RR: 0.77; 95% CI: 0.50, 1.17, p-value: 0.22; I2: 0%). Secondary outcomes exhibited a non-significant trend favoring Stereotactic Radiotherapy for dysphagia, esophagitis, pain, and radiodermatitis, while a non-significant increase was observed for nausea, fatigue, and vertebral compression fracture. CONCLUSION: In summary, stereotactic radiation therapy (SRT) has improved in achieving complete pain relief while exhibiting a decreased probability of delivering stationary pain compared to conventional radiation therapy (CRT). Nevertheless, it is crucial in future research to address a noteworthy limitation, specifically, the risk of vertebral compression fracture.

Silicon nanoparticles vs trace elements toxicity: Modus operandi and its omics bases.

Phytotoxicity of trace elements (commonly misunderstood as 'heavy metals') includes impairment of functional groups of enzymes, photo-assembly, redox homeostasis, and nutrient status in higher plants. Silicon nanoparticles (SiNPs) can ameliorate trace element toxicity. We discuss SiNPs response against several essential (such as Cu, Ni, Mn, Mo, and Zn) and non-essential (including Cd, Pb, Hg, Al, Cr, Sb, Se, and As) trace elements. SiNPs hinder root uptake and transport of trace elements as the first line of defence. SiNPs charge plant antioxidant defence against trace elements-induced oxidative stress. The enrolment of SiNPs in gene expressions was also noticed on many occasions. These genes are associated with several anatomical and physiological phenomena, such as cell wall composition, photosynthesis, and metal uptake and transport. On this note, we dedicate the later sections of this review to support an enhanced understanding of SiNPs influence on the metabolomic, proteomic, and genomic profile of plants under trace elements toxicity.

Iatrogenic Venous Compression Syndrome Following Bilateral Hip Arthroplasty: A Unique Case of Bilateral Femoral Vein Compression in a Patient With May-Thurner Syndrome.

Iatrogenic venous compression syndrome is defined by extrinsic vein compression due to medical hardware, particularly relevant after joint replacement surgeries. Inserting medical hardware can lead to immediate risks such as deep vein thrombosis and pulmonary embolisms due to local tissue inflammation. The long-term issues include venous insufficiency due to chronic vessel irritation, subsequently causing intimal proliferation and thickening. Despite the existing knowledge of venous compression syndromes, iatrogenic cases are severely underreported. Here, we present a unique case of bilateral common femoral vein compression in a patient with May-Thurner syndrome and prior bilateral hip arthroplasty. An 85-year-old man with a history of venous insufficiency and bilateral hip arthroplasty for osteoarthritis presented with bilateral leg edema. Unsuccessful sclerotherapy and radiofrequency ablation led to a referral to a vascular specialist for venous duplex scans, venograms, and intravascular ultrasound. May-Thurner syndrome was revealed in the left common iliac vein, prompting the deployment of an 18 mm × 16 mm stent. Subsequently, during a venogram, what initially appeared to be a vasospasm in the left common femoral vein was diagnosed as extrinsic iatrogenic venous compression due to acetabular hip screws. This was found after two IV injections of 400 mg nitrogen and one balloon angioplasty could not resolve the compression. After advancement over a 0.35" microwire and accurate positioning over the center of the left common femoral vein lesion, a 16 mm × 90 mm stent was deployed. The venogram and intravascular ultrasound also showed a similar compression in the right common femoral vein. Another 400 mg IV nitrogen did not expand the lesion, so it was concluded that there was similarly an iatrogenic venous compression of the right common femoral vein, also due to acetabular hip screws in the right femur. A follow-up was scheduled a couple of weeks later to address the issue in the right common femoral vein. The underreported issue of iatrogenic venous compression following joint replacements highlights the need for better recognition and management of vascular complications due to inflammation and intimal proliferation. This is especially the case in high-risk patients, such as those with May-Thurner syndrome.

Barriers to healthcare access and experiences of stigma: Findings from a coproduced Long Covid case-finding study.

BACKGROUND AND AIM: Long Covid is often stigmatised, particularly in people who are disadvantaged within society. This may prevent them from seeking help and could lead to widening health inequalities. This coproduced study with a Community Advisory Board (CAB) of people with Long Covid aimed to understand healthcare and wider barriers and stigma experienced by people with probable Long Covid. METHODS: An active case finding approach was employed to find adults with probable, but not yet clinically diagnosed, Long Covid in two localities in London (Camden and Merton) and Derbyshire, England. Interviews explored the barriers to care and the stigma faced by participants and were analysed thematically. This study forms part of the STIMULATE-ICP Collaboration. FINDINGS: Twenty-three interviews were completed. Participants reported limited awareness of what Long Covid is and the available pathways to management. There was considerable self-doubt among participants, sometimes reinforced by interactions with healthcare professionals (HCPs). Participants questioned their deservedness in seeking healthcare support for their symptoms. Hesitancy to engage with healthcare services was motivated by fear of needing more investigation and concerns regarding judgement about the ability to carry out caregiving responsibilities. It was also motivated by the complexity of the clinical presentation and fear of all symptoms being attributed to poor mental health. Participants also reported trying to avoid overburdening the health system. These difficulties were compounded by experiences of stigma and discrimination. The emerging themes reaffirmed a framework of epistemic injustice in relation to Long Covid, where creating, interpreting and conveying knowledge has varied credibility based on the teller's identity characteristics and/or the level of their interpretive resources. CONCLUSION: We have codeveloped recommendations based on the findings. These include early signposting to services, dedicating protected time to listening to people with Long Covid, providing a holistic approach in care pathways, and working to mitigate stigma. Regardless of the diagnosis, people experiencing new symptoms must be encouraged to seek timely medical help. Clear public health messaging is needed among communities already disadvantaged by epistemic injustice to raise awareness of Long Covid, and to share stories that encourage seeking care and to illustrate the adverse effects of stigma. PATIENT OR PUBLIC CONTRIBUTION: This study was coproduced with a CAB made up of 23 members including HCPs, people with lived experience of Long Covid and other stakeholders.

The structural, optical and photovoltaic properties of Zn-doped MAPbI2Br perovskite solar cells.

The spin coating method was used to deposit MAPbI2Br films on FTO-glass substrates. Zn2+ (zinc) doping was used for these films at intensity rates of 2% and 4%, respectively. XRD analysis proved that MAPbI2Br films had a cubic structure and a crystalline character. 2% Zn doping into the MAPbI2Br film had a modest large grain size (38.09 nm), Eg (1.95 eV), high refractive index (2.66), and low extinction coefficient (1.67), according to XRD and UV-vis analyses. To facilitate and enhance carrier transit, at contacts as well as throughout the bulk material, the perovskite's trap-state densities decreased. The predicted MAPbI2Br valence and conduction band edges are -5.44 and -3.52, respectively. The conduction band (CB) edge of the film that was exposed to Zn atoms has been pressed towards the lower value, assembly it a better material for solar cells. EIS is particularly useful for understanding charge carrier transport, recombination mechanisms, and the influence of different interfaces within the device structure. Jsc is 11.09 mA cm-2, Voc is 1.09, PCE is 9.372% and FF is 0.777. The cell made with the 2% Zn doped into the MAPbI2Br film demonstrated a superior device.

Study of Serum Electrolytes (Sodium and Potassium) Abnormalities in Acute Stroke.

Stroke is the common cause of death and disability worldwide, as well as in Bangladesh. Serum electrolytes abnormalities or dyselectrolytaemia is one of the major acute complications of stroke. Dyselectrolytaemia or serum electrolytes (sodium and potassium) abnormalities are more common in patients with acute stroke that can be easily measured. The study was planned to find out the serum electrolytes (sodium and potassium) abnormalities in acute stroke patients. This cross-sectional study was conducted in the Department of Neurology and Medicine, Mymensingh Medical College and Hospital from January 2019 to June 2020. Total 84 purposively selected patients with acute strokes were evaluated following informed written consent. Diagnosis was confirmed by neuroimaging of brain. Moreover, serum electrolytes level was measured for each patient. Data were collected by interviews, clinical examinations & laboratory investigations of the patients using a case record form and analysis was carried out by the help of SPSS 25.0. Mean age of the patients with acute strokes were 57.65±15.79 years. About two thirds (60.7%) of the patients were male and the remaining (39.3%) were female. Sodium imbalances were observed in 32.2% and potassium imbalances in 25.0% cases. About 66.7% haemorrhagic strokes patients and 42.2% ischaemic strokes patients had dyselectrolytaemia (p<0.05). More than twenty eight percent (28.6%) of all stroke patients had hyponatraemia, which was more common (35.9%) among haemorrhagic strokes patients (p<0.05). Of all stroke patients 21.4% had hypokalaemia, which was more common (28.2%) in haemorrhagic strokes patients (p<0.05). This study reveals that, serum electrolytes (sodium and potassium) abnormalities are more common in haemorrhagic than ischaemic strokes, which is mainly hyponatraemia and hypokalaemia.